Nexus Prosystems - Fusion All Weather - Black
Product Code: SKU_08B662BF
The quick and easy solution to filling joints between paving slabs and setts, suitable for natural stone and concrete paving. ProJoint™ Fusion™ allows an untrained hand to consistently deliver perfect joints every time - whatever the weather!Read More...
- Home Delivery 5 Days Delivery (Monday to Friday)
- Click & Collect Available for Click & Collect
- In Store Our stores stock this product
- Suitable for use in wet weather
- Professional strength
- Premixed, ready to use
- Cement free
- Suitable for pedestrian traffic, ideal for paths & patios
- Perfect for DIY use
- Non hazardous
Ensure the surface of the paving is clean prior to application. Check the joints are cleaned out to a depth of 25mm observing a minimum joint width of 3mm, and that the paving is firmly bedded and stable prior to filling joints. Paving should be laid on a permeable bedding mix as Fusion™ cures when it dries out so water/rain must have a route of escape.
Apply Fusion™ when ground temperature is above 0°C. Liberally soak the paving first and then empty the mix evenly onto the surface and work quickly into the joints using a brush or squeegee. Mist the surface and compound with a soft spray of water to flush the material down into the joints. Top up any low joints and repeat as necessary. Once the water has drained away then sweep the paving with a fresh soft brush at 45° to the joints, and remove any excess. A trowel or iron can be used to achieve a traditional finish if required. The product can be used in light rain but prolonged and heavy rain will delay the curing process and increase the risk of fluid damage.
Clean all tools after use with water. Fusion™ may highlight and enhance the natural surface colours and textures of the paving. This is only a temporary effect and weathering and foot traffic accelerate its disappearance. If in doubt test on a small trial area prior to full product application.
Fusion™ cures on exposure to air. Curing times are dependant on temperature and moisture but as a guide it will set within 24 hours at a temperature of 20°C at 65% humidity. Cold temperatures and moisture will increase curing time significantly.
Store Fusion™ unopened in cool and dry conditions if possible. However product is not affected by frost and has unlimited shelf life if packaging is protected from punctures. It is advisable to protect the product from high summer temperatures.
Non-hazardous but may cause mild irritation to the skin or respiratory system. People with particularly sensitive skin are advised to wear gloves. Wash hands with warm soapy water after use.
Approximate coverage per 15kg tub
|Joint Size||900x600mm Slabs||600x600mm Slabs||100x100mm Setts|
Questions about any of our paving range? Call our paving experts on 0800 999 3055. Lines open Monday - Saturday 09:00 - 17:30. Calls charged at standard national rate
Need a sample? Why not order one of our sample kits
Our sample packs are completely free! We only ask you to pay for delivery due to freight weight costings.
Reviews For Nexus Prosystems - Fusion All Weather - Black
Be the fist to review the Nexus Prosystems Fusion All Weather - Black.