Nexus Prosystems - ProJoint V35-UV - Buff

Product Code: SKU_02AC9125

Out of Stock
£60.00 Inc. Vat

A very advanced but simple to use solution to filling joints between paving slabs and setts, suitable for all types of natural stone and concrete paving on pedestrial and vehicular areas up to 3.5 tonnes.

Read More...
Home Delivery 5 Days Delivery (Monday to Friday)
Click & Collect Available for Click & Collect
In Store Our stores stock this product

A very advanced but simple to use solution to filling joints between paving slabs and setts, suitable for all types of natural stone and concrete paving on pedestrial and vehicular areas up to 3.5 tonnes. 

The single component PU resin is mixed with the sand in the kit and applied to dry paving using either a brush or a squeegee. It offers a long processing time which makes it especially suited for paving with narrow joints and for use in hot weather. It forms a UV stable, strong, weed free, frost and pressure washer resistant joint.

  • One part PU resin based mortar system, cement free
  • Light to medium traffic loads up to 3.5 tonnes
  • Fast application
  • Easy: No more bending or kneeling
  • Long working time, ideal for narrow joints and hot weather
  • Suitable for joint widths from 5mm upwards
  • Colours: Buff, Mid Grey and Black
Preparation

Ensure the joints are cleaned out to a minimum depth of 25mm for 3.5t traffic loading, and a minimum joint width of 5mm. Paving must be firmly bedded and stable prior to filling joints on bedding material suitable for the intended traffic loading. Liberally wet the paving prior to mixing allowing the water to soak into the surface.

V35-UV™ can be mixed in either a rotary concrete mixer or by using a drill and paddle in a mixing vessel. Add the sand to the mixer and when wearing appropriate PPE, pour in the resin and begin mixing. Mix for around three minutes until thoroughly mixed.

Application

Ensure that the paving is still wet and surface temperature is between 5°C and 35°C. Empty the mix evenly onto the paving and work into the joints using a squeegee to ensure material is well compacted into the joints. Compaction of the material is important as any underlying voids could result in secondary settlement.

Once worked into the joints use a soft brush at 45° to joints, and carefully sweep off all the excess leaving the paving clean. Shower resistant after initial cure but requires protecting from rain until set. Make sure that any protective cover does not come into contact with the fresh joints. A trowel or iron can be used if necessary once the mortar has begun to cure to achieve a traditional finish.

Cure times are dependant on temperature and humidity but as a guide can accept foot traffic after 12 hours and vehicle traffic after 24 hours.

Coverage

Approximate coverage per 26kg kit

Joint Size: 100x100mm Setts 450x450mm Slabs 600x600mm Slabs
5mmx25mm deep 8m2 34m2 45m2
10mmx25mm deep 4m2 17m2 22.5m2
15mmx25mm deep 2.67m2 11.3m2 15m2

Contact our paving stone expect today

Questions about any of our paving range? Call our paving experts on 0800 999 3055. Lines open Monday - Saturday 09:00 - 17:30. Calls charged at standard national rate

Need a sample Order your sample today

Need a sample? Why not order one of our sample kits

Our sample packs are completely free! We only ask you to pay for delivery due to freight weight costings.

Checkout
Product Name Qty Price
Total £
Checkout Back

Order Complete


Your Order () is now complete, we will send you an email to confirm your samples are on their way!

Thank you very much for your custom.

Venus Stone Team.

Reviews For Nexus Prosystems - ProJoint V35-UV - Buff

Marketing communications - Our customers enjoy receiving special offers, helpful information and money saving coupons by email, text, phone and post. So you don't miss out, simply tick the boxes below Remember, you can opt out at any time.
Prove You’re Human..

Be the fist to review the Nexus Prosystems ProJoint V35-UV - Buff.