You are in: All categories > Paving Accessories > Sealers

Nexus Prosystems PRO-810 Paving Sealer Invisible 5L

£123.95

PRO-810™ Paving Sealer Professional solvent based impregnating paving sealer - invisible finish PRO-810TM Invisible Paving Sealer is a high performance, solvent based surface sealer which has an invisible finish and can be applied to all types of natural stone. It deeply impregnates the stone and protects surfaces from water penetration, staining and protects surfaces from water penetration, staining and the effects of natural weathering whilst remaining breathable.

PRO-810TM does not hange the colour or texture of the surface and can be used on virtually all porous surfaces, particularly high quality natural stone.

PayPal ‘Pay In 3’ option now available! Just select pay by PayPal at checkout!

Product Filter:	Sealer
Quantity:

PRO-810 is a high performance, solvent based surface sealer which has an invisible finish and can be applied to all types of natural stone immediately after installation.
It deeply impregnates the stone and protects surfaces from water penetration, staining and the effects of natural weathering whilst remaining breathable. Does not change the colour or texture of the surface and can be used on virtually all porus surfaces, particularly high quality natural stone.

Suitable for outdoor and indoor use.
Professional grade water repellent for porous natural stone and concrete
Breathable
Invisible finish
Seals & protects
Resists dirt, grime and algae
Long lasting protection & UV stable
Deeply impregnating
High coverage rate
Available in 1, 5 and 25 litre containers

Application
Substrates should be sound, clean and free from dirt, dust, oil, etc and preferably dry to aid penetration. We recommend cleaning with Nexus Paving & Driveway Cleaner prior to application.

Preparation
PRO-810 Paving Sealer is designed as an invisible coating but may darken very light surfaces slightly. As with all sealants always try a small inconspicuous area before full application. The sealer is supplied ready for use and should be applied between 5°C and 30°C. Application may be made by brush, roller or spray. Apply a complete, even coat over the whole surface ensuring any excess is removed. Allow to dry and repeat application with a thin and even second coat to provide increased protection. Dryness will normally occur within 2 hours with full curing taking up to 24 hours. Protect from rain until cured.

Coverage
This product covers approximately 7-12m2; per litre depending on substrate porosity.